Rebuilt Engine Type F106A with Gearbox


A completely rebuilt Ferrari F106A carburettor engine with gearbox. The engine carries number 00718 and originates from a RHD 1975 308GT4 that was initially delivered in the UK, which had 68.000 miles covered. During 2015 and 2016 the engine and gearbox underwent a very thorough rebuild with invoices showing proof of all the work performed. Next to an extensive cosmetic overhaul, the engine got a major service, the cylinder heads were removed and overhauled, all seals, O rings and gaskets were replaced, the gearbox was rebuilt, crankshaft and pistons were cleansed, the carburettors were rebuilt, a new water pump was installed, and much much more was done in order to make this engine run and look like new. More recently in March 2023, the clutch was renewed, the distributors partially overhauled and the starter and alternator rebuilt. All documented. This carburettor engine can also be used in early 308 GTB's and of course in any other model/project/prototype you like.


Included: everything you see on the pictures + 2 partially rebuilt distributors

Documents: invoices of the work performed during 2016, invoices for the work done on the clutch and distributors during 2023.

SOLD


For all information and details, please get in touch with us by email or phone.

Ferrari_308GT4_Rebuilt_Engine_3
Ferrari_308GT4_Rebuilt_Engine_22
Ferrari_308GT4_Rebuilt_Engine_2
Ferrari_308GT4_Rebuilt_Engine_18
Ferrari_308GT4_Rebuilt_Engine_21
Ferrari_308GT4_Rebuilt_Engine_19
Ferrari_308GT4_Rebuilt_Engine_20
Ferrari_308GT4_Rebuilt_Engine_1
Ferrari_308GT4_Rebuilt_Engine_6
Ferrari_308GT4_Rebuilt_Engine_7
Ferrari_308GT4_Rebuilt_Engine_17
Ferrari_308GT4_Rebuilt_Engine_16
Ferrari_308GT4_Rebuilt_Engine_15
Ferrari_308GT4_Rebuilt_Engine_12
Ferrari_308GT4_Rebuilt_Engine_9
Ferrari_308GT4_Rebuilt_Engine_10
Ferrari_308GT4_Rebuilt_Engine_13
Ferrari_308GT4_Rebuilt_Engine_11
Ferrari_308GT4_Rebuilt_Engine_8
Ferrari_308GT4_Rebuilt_Engine_23
Ferrari_308GT4_Rebuilt_Engine_24
Ferrari_308GT4_Rebuilt_Engine_25

Bodywork


Door Front Quarter Glass 308GT4 Part nr 40074601 RH and 40074700 LH


This is a tinted front quarter glass for the 308GT4 and 208GT4 doors. In excellent shape, free of scratches and chassis numbers.


Check availability in the webshop


Detailed pictures here and here


Door Glass 308GT4 Part nr 40074809 RH and 40074908 LH


This is an authentic tinted door glass for the 308GT4 models. In excellent shape, free of scratches and etched numbers. The lower mounting bolts are included.


Check availability in the webshop


Detailed pictures here and here


Rear Quarter Window with Frame 308GT4 Part nr 40037004 RH and 40037103 LH


This is a complete frame with the tinted glass, fully original. The securit glass was made by S. Gobain. The rubber gasket needs to be replaced. The chrom frame is in very good shape, but you might want to have it rechromed.


Check availability in the webshop

Detailed pictures here, here, here, here, here, here and here


Front Spoiler 308GT4 Part nr 40013708


A wonderful spoiler in fibreglass that fits the 308GT4 model. In excellent shape, ready to be mounted on a car.


Check availability in the webshop


Detailed pictures here, here, here, here and here


Front Bonnet 308GT4 Part nr 40013500


A front lid that was partially refurbished. Now it is free of rust and partially finished in primer paint, so there is some limited body work to do and a paint job. The structure is in good shape.


Check availability in the webshop


Detailed pictures here, here, here and here


Engine Lid 308GT4 Part nr 40178907


A new engine lid for the 308GT4 model. It is in excellent shape, fits the RHD version of the car, but also the LHD version if you transfer the small mount of the strut to the other side.


Check availability in the webshop


Detailed pictures  here, here, here, here and here


Engine Lid Grill 308GT4 Part nr 40089807


This is an authentic grill that fits in the engine lid of the 308GT4 earlier and later models. In very good shape, but you might want to repaint it.


Check availability in the webshop


Detailed pictures here, here, here and here


Front Bonnet Grill 308GT4 Part nr 40091407


An authentic grill in excellent shape! Fits the earlier and later 308GT4 models.


Check availability in the webshop


Detailed pictures here, here, here and here


Windshield 308GT4 Part nr 40314205


A new windscreen made by Pilkington, for the Ferrari 308GT4. In perfect shape.


Check availability in the webshop


Detailed pictures here, here, here and here


Trunk Lid 308GT4 Part nr 40364408


An original trunk lid in good shape. It is free of rust and has been put in primer paint. Fits all GT4 models. The cable is included. At the back, there is some trunk mat residue visible.


Check availability in the webshop


Detailed pictures here, here, here and here


Rear View Mirror 308 Part nr 60058500 LH and 60058400 RH


A new side mirror. Fits the 308GT4, 308 GTB/GTS and 512BB. Comes with the rubber gasket and both screws.


Check availability in the webshop


Detailed pictures here, here and here


Door Lock Striker Pair Part nr 20019204 and 20019105


A pair of new lock strikers that fits many models. Very nice chrome finish. Sold as a pair.


Check availability in the webshop


Detailed picture here


Dino Badge 308GT4 Part nr 20043303


An authentic badge that shows some light patina. It is in excellent shape with 2 bolts at the back.


Check availability in the webshop


Detailed pictures here and here


Fuel Cap 308GT4 Part nr 40038606


A fuel cap that fits all GT4 models. In good shape, painted in primer paint.


Check availability in the webshop


Detailed pictures here and here


Turn Signal Lens Clear/Amber 308GT4 Part nr 40232605


In very good shape, made by Carello.


Check availability in the webshop


Detailed pictures here and here


Doorstep Kick Plate 308GT4 Part nr 40109704


An original kick plate in very good shape. Fits all GT4 models.


Check availability in the webshop


Detailed pictures here and here


Roof Panel 308GT4 Part nr 40017600


This roof panel fits the first generation of the 308GT4. This panel requires some body work: there are some tiny holes in the RH gutter caused by oxydation. The top has been covered in several layers of primer paint.


Check availability in the webshop


Detailed pictures here, here, here, here, here and here


Rear Wheel Arch Panel 308GT4 Part nr 40007809 RH and 40007908 LH


Both in very good shape. These fit all GT4 models. Made in fibreglass.


Check availability in the webshop


Detailed pictures here, here, here and here


Lamp Cover 308GT4 Part nr 40109407 RH and 40109506 LH


A cover in good shape, fits all GT4 models.


Check availability in the webshop


Detailed picture here


Front Bumper Rubber Insert 308GT4 Part nr 40313108


This is a new rubber piece that fits in the front bumper of the 308GT4 models.


Check availability in the webshop


Detailed pictures here, here, here and here


Door Frame and Panel 308GT4 Part nr 40052904 RH and 40053001 LH


This is a complete door, that's the frame with the 'skin'. It's a second hand door, but it is in rust-free condition. It has been protected against humidity and oxydation. The structure is very solid.It fits all 208/308GT4 models.


Check availability in the webshop


Detailed pictures here, here, here, here, here, here, here, here and here


Rear Lid Opening Handle 308GT4 Part nr 40044505


A pull handle for opening the rear lid(s) of the 208/308GT4 models. In good shape, but one of the handles is a little bit creased. One of the cables is still attached.


Check availability in the webshop


Detailed picture here


Outer Door Handle 308GT4 Part nr 40062507 RH and 40062606 LH


A complete door handle for the 308GT4 models. It is in pretty good shape and holds the lock barrel (no key) but it shows some oxydation under the chrome , so should be rechromed ideally.


Check availability in the webshop


Detailed pictures here, here, here and here


Inner Door Handle 308GT4 Part nr 40063703 RH and 40063802 LH


This is a complete door handle that fits the early version of the 208/308GT4. It consists of the handle assembly with the lever. Both are in good shape, but the chromed surface of the lever shows some oxydation.


Check availability in the webshop


Detailed pictures here, here and here


Front Wing 308GT4 Part nr 40001109 RH and 40001208 LH


A front wing in good shape, but there are a number of signs (welding) visible of previous repairs at the front tip, bottom and the section close to the A pillar too. These have been vapour blasted and protected against oxydation. These came off a 1975 308GT4 RHD car. There is some bodywork required as you can see, but it is a solid base.


Check availability in the webshop

Detailed pictures here, here, here, here, here, here, here, here, here, here, here and here


Headlamp Support 308GT4 Part nr 40238107 RH and 40238206 LH


A support in excellent shape, it has been vapour blasted and put in primer. Including the bolts and adjustment nuts.


Check availability in the webshop


Detailed pictures here and here


Rear Heated Window Glass 308GT4 Part nr 40074304


This is a new and original rear window glass for the 308GT4 and 208GT4 models. In perfect shape, produced by SIGLA in West-Germany :)


Check availability in the webshop


Detailed pictures here, here, here and here


Exhaust Heat Shield 308/308GT4 Part nr 116583


This is an aluminium heat shield in excellent original shape, free of cracks. Fits the 308GT4, 308 and Mondial 8 models.


Check availability in the webshop


Detailed pictures here and here


Door Lock Assembly 308GT4 Part nr 40062309 LH and 40062200 RH


An original door lock in good shape.


Check availability in the webshop


Detailed pictures here and here


Flexible Rubber Hose Part nr 107103


This is a new flexible rubber hose for the air intake of several models.


Check availability in the webshop


Detailed picture here

Electrics


Rear Light 308GT4 Part nr 40030405 RH and 40030504 LH


These are authentic lights made by CARELLO in the 70's. In excellent & wonderful shape, free of scratches and cracks. Including the cables and bulbs.


Check availability in the webshop


Detailed pictures here, here, here and here


Electric Fan 308GT4 Part nr 103474


An electric fan that sits in front of the 308GT4 cooling radiator. In good working order and fully authentic.


Check availability in the webshop


Detailed pictures here and here


A/C Thermostat Part nr 109819


A complete and impossible to find authentic A/C thermostat, which fits the 308 GTB/GTS, 308 GTBi/GTSi, 308GT4, 400, 288GTO, 512BB and 512BBi. In good working order.


Check availability in the webshop


Detailed pictures here


Ignition Coil Assembly 308 Part nr 109584


Made by Magneti Marelli, used, but working well. Specification: 12V 6A in 200A out. AEI 200A. Fits the 308 and the 308 GT4.


Check availability in the webshop


Detailed pictures here, here, here and here.


Part nr 101990 Switch


This switch is used for a variety of things like the speed of the A/C airflow.


Check availability in the webshop


Detailed pictures here and here


A/C Compressor TCCI Part nr 111222


This is a new - impossible to find - A/C compressor made by TCCI that fits many Ferrari models from early 70's to early 80's. More information on request.


Check availability in the webshop


Detailed pictures here, here, here and here.


Switch Box 308GT4 Part nr 40022303


A switch board for the first generation of the 308GT4 Dino. In good shape; with the labels attached.


Check availability in the webshop


Detailed pictures here, here and here


CHOKE Lever 308GT4 Part nr 40113805


A choke lever including the cable and bracket, only fits the 308GT4 model (both generations). In good working order.


Check availability in the webshop


Detailed pictures here and here


Fusebox 308GT4/512BB Part nr 40052607


A fusebox in used but good condition. Fits the GT4, 308 Carburettor and 512BB models.


Check availability in the webshop


Detailed picture here


Fusebox 308GT4/512BB Part nr 40052706


In used but good shape. Fits the GT4, 308 Carburettor and 512BB models.


Check availability in the webshop


Detailed picture here


Front Indicator Light 308GT4 Part nr 40030207


A new indicator lamp that fits in the front bumper of the 208/308GT4 models.


Check availability in the webshop


Detailed pictures here, here and here


Reverse Lamp Part nr 20160602


A new reverse lamp that fits in the 308/208GT4, early 308, 246 and 365 models.


Check availability in the webshop


Detailed pictures here and here


Fan Motor Clockwise 308GT4/400 Part nr 20094405


This is a new and authentic fan motor that fits the 308GT4, 208GT4, 400GT, 246 Dino, 365GT4BB and 365GTB4 models. In excellent working order.


Check availability in the webshop


Detailed pictures here and here


Main Switch Assembly Part nr 116780


This is a complete switch assembly for the window wipers, lights and direction indicators. As you can see on the pictures, it has the typical cracks in the plastic sockets of the stalks, though the stalks are still well attached. It is a 50 year old part, so the labels on the stalks have vanished a bit. It fits all 308, 308GT4, 400(i) models and the 512BB too. As you can see, some of the wires were cut, so some attention is required.

Check availability in the webshop

Detailed pictures here, here, here, here and here

Interior


Front Seat 308GT4 Part nr 40201105 LH and 40201006 RH


These seats are in excellent shape, considering their age. The front is covered in black tissue and the back in black leather. The tilting and adjustment mechanisms are working fine. The RH seat has about 5cm of lining that has detached as you can see on the pictures. Other than that, these seats are in A+ condition. All plastic covers are included.


Check availability in the webshop

Detailed pictures here, here, here, here, here, here, here, here, here, here, here and here


Lower Side Trim 308GT4 Part nr 40075202 RH and 40275307 LH


These trim parts come from a 1975 308GT4 and only fit that model generation. In good shape, with the vinyl still well attached to the moulding.


Check availability in the webshop


Detailed pictures here, here, here and here


Pocket Frame 308GT4 Part nr 40321408 RH and 40321507 LH


Very rare trim panels for the 308GT4 models in good shape, with the original vinyl still attached. Some scuffs here and there (see pictures).


Check availability in the webshop


Detailed pictures here, here, here and here


Lower Dashboard Trim 308GT4 Part nr 40092207 RH and 40092306 LH


A trim piece in excellent shape, covered in black vinyl.


Check availability in the webshop


Detailed pictures here, here, here and here


Dashboard RHD 308GT4 Part nr 40144305 and 40186207


A vinyl covered dashboard for the RHD 308GT4. The structure is in excellent shape and the vinyl covering too. The round air vents are NOT included. The small mirror in the glovebox compartment needs to be replaced. Other than that it is in excellent shape. The opening switch works fine.


Check availability in the webshop


Detailed pictures here, here, here and here


Rear Seats 308GT4 Part nr 40097502


A wonderful back bench for the 308GT4 and 208GT4 early model, covered in black tissue and leather (sides). The structure is in excellent shape, the tissue is also in great shape, but has one small cigarette burn mark as you can see on one of the pictures.


Check availability in the webshop


Detailed pictures here, here, here, here, here, here and here


Rear Window Side Moulding 308GT4 Part nr 40047607 RH and 40047706 LH


An original moulding that fits next to the rear window in the interior. It is covered in black vinyl and in excellent shape.


Check availability in the webshop


Detailed pictures here and here


Inner Door Panel 308GT4 Part nr 40212607 LH and 40212508 RH


These panels are in excellent shape with the original leather still attached to it. The pockets are included. Unfortunately some holes were cut to fit speakers. The black cloth needs to be re-glued to the panels too. Other than that these are fine.


Check availability in the webshop


Detailed pictures here, here, here, here, here and here


A Pillar Trimmed Moulding 308GT4 Part nr 40091902 and 40091803


A set of used A pillar mouldings with vinyl covering. Both in excellent shape, for sale as a pair.


Check availability in the webshop


Detailed picture here


Seat Headrest Set 308GT4 Part nr 40097403


These are for sale as a pair authentic rear seat headrests for the 308GT4 models. They come from a 1975 308GT4. The tissue is in very nice shape.


Check availability in the webshop


Detailed pictures here and here


Air Vent Dino 308GT4 Part nr 40152803


An authentic air vent that fits in the centre of the dashboard. It opens well and is in very good shape. Shows the DINO label. Fits the earlier and later Ferrari Dino 308GT4 and 208GT4 versions.


Check availability in the webshop


Detailed pictures here and here


Safety Belt Set 308GT4 Part nr 108504


This is a complete set of red safety belts with the buckle holders. Everything is working fine. Only fits the 308GT4 and 208GT4 models. Including bolts and bolt covers.


Check availability in the webshop


Detailed pictures here, here and here


Trunk Mats Set 308GT4


These mats are in very good shape, the fabric is still nice and clean. For sale as a complete set. These come from a British 308GT4, including buth trunk lid mats. Fits all GT4 models, except for the US market apparently.


Check availability in the webshop


Detailed pictures here, here and here


Centre Console RHD 308GT4 Part nr 40185605

This is a centre console for the RHD version of the GT4 models. It is covered in black vinyl, which is still in nice shape considering its age. The overall structure underneath is very good. a previous owner has added a VOLT meter at the top to show the voltage of the battery, a good idea. The vinyl shows to rips or tears, only 2 very small screw holes where someting was attached, passenger side, difficult to notice.

Check availability in the webshop

Detailed pictures here, here, here, here, here and here


Front Tunnel Cover RHD 308GT4 Part nr 40108003


A front tunnel cover for the RHD GT4 models. In good shape. The vinyl is not ripped and looks fine, it is retracted a bit on one side and shows the color of the material behind it.


Check availability in the webshop


Detailed pictures here and here


Panel Control Knob 308GT4 Part nr 40030108


An original knob in very nice shape, ready to be reused. Only fits the 208/308GT4 models.


Check availability in the webshop


Detailed picture here


Air Diffuser 308GT4 Part nr 40230500


A complete air diffuser that fits under the dashboard of the 308GT4 models. In very good shape, showing the 'Dino' sign.


Check availability in the webshop


Detailed picture here



Wheels and accessories


Spare Wheel Dino 208/308/GT4 Part nr 105593


This is an authentic spare wheel for the 308, 208 Turbo and 308GT4 models that was made in 1974. It has never been used and still holds the max speed sticker at the front. Indicated: DINO - 3 1/4"B x 18. The Michelin 105R18x is still on the wheel and still appears to be in very good shape, free of cracks, just like new.


Check availability in the webshop


Detailed pictures here, here, here, here, here, here and here


Set of Wheels 16" 308 Part nr 120926 and 120927


This is a full set of alloy 16" wheels that fit the 308 range. Never used, brand new. These have been manufactured by an Italian specialist and meet all original specifications and allow you to use 16" tires. Specifications: Front: 7 x 16" - Offset: 11,15 - PCD: 5 x 108, OE part nr : 120926, Rear:

8 x 16" - Offset: 11,45 - PCD: 5 x 108, OE part nr : 120927

Check availability in the webshop

Detailed pictures here, here, here, here, here and here


Set of 14" Speedline Cromodora Wheels 308 Part nr 114441


This is a set of authentic Cromodora 7 1/2 x 14" wheels that have been vapour blasted and painted in gold finish. Considering their age (around 1975) these are still in good shape. The surface has degraded as bit and has become grainy but they are still in good structural shape. These look just incredible.


Check availability in the webshop

Detailed pictures here, here, here, here, here, here, here and here


Ratchet Spanner for Jack Part nr 106532


A ratchet spanner that looks like new, probably never used before. Fits the jack kit of many models.


Check availability in the webshop


Detailed picture here


Jack Kit Bag in Vinyl Part nr 129248


An authentic vinyl bag in excellent shape for the car jack. The vinyl is in top shape and the straps are fine too. Used, but in great shape.


Check availability in the webshop


Detailed pictures here, here, and here


Vinyl Bag for Toolkit


This is an authentic vinyl bag for the standard Ferrari toolkit of a variety op models. In excellent condition, with the push buttons. Closes well, looks wonderful.


Check availability in the webshop


Detailed pictures here, here, here

Engine, transmission and clutch


Air Filter Box 308GT4 Part nr 104546


An authentic air filter box for the earlier models of the GT4 models. It has been repainted with fresh black wrinkle paint and holds 2 nuts for fixing the top cover. It is in mint condition and looks totally awesome! A true piece of art.


Check availability in the webshop


Detailed pictures here, here, here, here, here and here


Water Pump with Gasket Part nr 121255


A new water pump with the gasket. This fits all V8 engine models between 1976 and 1988.


Check availability in the webshop


Detailed pictures here and here


Engine Mount Part nr 139640


This is a new engine mount, never used! Markings at the top: D14, FIBET, 135-40.


Check availability in the webshop


Detailed pictures here and here


Complete Con Rod Part nr 109738


Con rods that fits a huge variety of models. These are used, but in very good shape and vapor blasted. Weight codes : F, G and H.


Check availability in the webshop


Detailed pictures here, here and here.


CV Joint Bearing for Axle Part nr 103885


Although this bearing doesn't have its own part number according to the diagrams, we do sell these separately. These are new. You will need to apply grease before using it.


Check availability in the webshop


Detailed picture here


Oil Radiator Part nr 145712


A close to new oil radiator that fits many models like all 308 models, 308GT4, Mondial 8 and QV and the 400 and 400i.


Check availability in the webshop


Detailed pictures here and  here


A/C Compressor Bracket Part nr 108050


A bracket in good shape, with the rubber gaskets included. Fits the 308GT4, 308 and Mondial 8 models.


Check availability in the webshop


Detailed pictures here and here


Gear Shifter Complete 308GT4 Part nr 107876


This is a gear shifter that comes from a RHD 1977 308GT4 (chassis 09590). It has been cleansed and looks good, buts needs to be lubricated again before use. It is in very good structural shape. The shifting lever is for the RHD version (part nr 106830).


Check availability in the webshop


Detailed pictures here and here

Brakes and suspension


Front Brake Calipers Set 308/308GT4/208 Part nr 106357 RH and 106358 LH


A set of authentic brake calipers for the front wheels made by ATE. These have been rebuilt a while ago and served for a short period of time. These fit the 308GT4, 308 GTB, 308 GTBi/GTSi and the first generation 208 Turbo. Painted in black. Including practically unused brake pads. For sale as a pair.


Check availability in the webshop


Detailed pictures here and here


Rear Brake Calipers Set Part nr 106360 RH and 106359 LH


Check availability and options in the webshop


Detailed pictures here and here


Brake Balance Valve 308/308GT4/512BB Part nr 104479


This valve comes from a 1976 308 and fits the 308 GT4, the 308 carburettor models and the 512BB and BBi. It was working well when removed.


Check availability in the webshop


Detailed pictures here and here


Brake Balance Valve 308/308GT4/512BB Part nr 104479


This valve comes from a 1976 308 and fits the 308 GT4, the 308 carburettor models and the 512BB and BBi. It was working well when removed.


Check availability in the webshop


Detailed pictures here and here


Silentbloc Bush Part nr 111616


New - fits many models.


Check availability in the webshop


Detailed picture here


Brake Servo and Pump Bendix LHD Part nr 151471


This is a complete servo assembly with the pump and the reservoir, made by Bendix in Italy. It also still holds the nuts and sensor within the reservoir. It was removed from a LHD 512TR, but fits many models of the 80's and 90's. The unit looks very good and works well.


Check for availability in the webshop


Detailed pictures here, here, here and here


Lower Lever Rear Suspension 308 Part nr 104428 RH and 104429 LH


In very good shape. Bushes need to be replaced. You may want to powdercoat it to make it absolutely perfect.


Check availability in the webshop


Detailed pictures here and here


Upper Lever Rear Suspension 308/328 Part nr 104422 LH and 104423 RH


In very good shape. Bushes need to be replaced. You may want to powdercoat it to make it absolutely perfect.


Check availability in the webshop


Detailed pictures here and here


Upper Lever Front Suspension 308/328 Part nr 104393 LH and 104392 RH


A lever in excellent shape. The structure is in fantastic shape. You may want to powdercoat it to make it absolutely perfect


Check availability in the webshop


Detailed pictures here and here


Suspension Fork 308/328/208T Part nr 114236


A fork that has been coated with a zinc layer recently. In used, but excellent shape.

Dimensions: width outer sides of fork: 58mm, bolt length: 78mm, bolt thickness: 14mm


Check availability in the webshop


Detailed pictures here


Lower Front Suspension Fork 3x8 Part nr 134929


A fork that connects to the front lower suspension lever. Fits all 308, 308GT4 and 328 models, including all 208 Turbo and GTB and GTS Turbo models.


Check availability in the webshop


Detailed picture here


Lower Rear Suspension Fork 308/308GT4 Part nr 104439


This is a fork that is connected to the lower rear suspension lever. Fits the 308GT4 and 308 carburettor models.


Check availability in the webshop


Detailed picture here


Front Stub Axle with Wheel Hub 308 Part nr 104374 RH and 104375 LH


This stub axle has been cleaned as you can see. It is in excellent shape and fits the 308 (model years 1976 and 1980) and the 308GT4. The bearings are OK, they don't make much noise, but you might want to replace them anyhow.


Check availability in the webshop


Detailed pictures here, here and here


Rod Link Part nr 108432


A rod link with bushes in very good condition. Used and cleaned, the bushes don't need immediate replacement. Fits all the 308 and 328 and Mondial models.


Check availability in the webshop


Detailed picture here


Lower Ball Joint Part nr 133944


A refurbished ball joint in excellent shape, fits many models. The head turns as it should. Including the nut.


Check availability in the webshop


Detailed pictures here and here


Upper Ball Joint Part nr 116280


Upper ball joint for the front steering knuckle. Rubber looks like new, head turns as it should.


Check availability in the webshop


Detailed pictures here and here


Part nr 104402 Front LH Lower Lever


In very nice condiion. It has been vapor blasted and repainted.


Check availability in the webshop


Detailed pictures here and here


Hand Brake Lever 308 Part nr 108965


In very nice condition, no rust! Including the electric cable.


Check availability in the webshop


Detailed pictures here and here


Handbrake Support Assembly Part nr 106415


This is a complete rear handbrake lever assembly that fits below the engine on a 308GT4, 308, Mondial QV and Mondial 8 model. It includes both pulleys, cable fork, lever, bolts and plates. For sale as 1 unit.


Check availability in the webshop


Detailed pictures here and here


Rear Hub Holder with Shaft and Flange 308GT4 Part nr 106150 LH and 106149 LH


This is a complete rear hub assembly with the flange and the shaft. It has been cleansed and repainted. The bearings need to be replaced as these make an abrasive sound. These are made in cast iron.


Check availability in the webshop


Detailed pictures here, here, here and here


Rear Hub Bearing Part nr 101221


A new bearing made by SKF. Dimensions: inner 45mm, outer 85mm


Check availability in the webshop


Detailed picture here


Rear Hub Bearing Part nr 101220


A new hub bearing made by SNR. Outer diameter: 72mm, inner diameter 35mm


Check availability in the webshop


Detailed picture here

Exhaust


Rear Exhaust Manifold 308 Part nr 106584


An authentic new old stock exhaust manifold that has never been used. This fits the 308GT4 and 308 model year 1976 and 1980 and the 308 GTBi/GTSi. It is in perfect condition.


Check availability in the webshop


Detailed pictures here, here and here.



Exhaust Mount with Fork Part nr 106052


In like new condition and the fork is included! Fits a variety of Ferrari models.


Check availability in the webshop


Detailed picture here.



Fuel System


Fuel Accumulator Part nr 113978


A used fuel accumulator in used shape, but functioning very well. Made by BOSCH. Fits a variety of models.


Check availability in the webshop


Detailed picture here


Fuel Tank 308GT4 Part nr 106251 LH and 106257 RH


An authentic fuel tank for the GT4 models. Used, but in good shape. The LH tank still holds the level sender. Both have been checked and are ready to be reused.


Check availability in the webshop


Detailed pictures here, here and here

Steering


Anti-Theft Device Part nr 127297


An anti-theft device with the lock cylinder in good shape. Working like it should, including the keys. Fits the F40, 328, 308, 308GT4, 400, 288GTO, 512BB(i) and 412 models. Extremely hard to find.


Check availability in the webshop


Detailed pictures here and here


Steering Rack Support Part nr 108241 and 115493


This is a steering rack support, consisting of both blocks, bolts, nuts, spacers and washers. 2 types : one for the RH and one for the LH side. Diameter of the whole makes the difference - either 30 or 38 mm.


Check availability in the webshop


Detailed pictures here and here


Steering Wheel MOMO 308 Part nr 107484


This is an authentic MOMO steering wheel from a 308 GT4, but fits the 308 carburettor models and 512BB too. It is finished in black leather, which shows patina (about 45 years old). The leather shows very small light cracks, but is not torn anywhere. It feels a little rough, but can be softened with products to treat leather. The hub is included. Diameter of the inner hub hole: 5,4cm. Total diameter : 35,5 cm.


Check availability in the webshop

Detailed pictures here, here, here, here, here and here


Support steering Column 308GT4 Part nr 106611 and Upper Shaft Part nr 106609


A steering column support with the shaft, fits the 208/308GT4 model range. It is in good shape, vapour blasted, but the bearings should be replaced to be good.


Check availability in the webshop


Detailed pictures here, here and here


Steering Column Cover 308GT4 Part nr 106018


A steering column cover for the 308GT4 Dino range. It is in excellent shape and still has the complete chassis number on it, removed from the pictures.


Check availability in the webshop


Detailed pictures here, here and here